Pet Portrait Bar Necklace
A slim bar that lies flat across the collarbone, their portrait and name side by side on it. Drawn from your photo by an artist, then engraved.
- 316L Surgical SteelHypoallergenic
- Hand-drawnBy a real artist
- Gift-ready boxIncluded free
- 30-day guaranteeLove it or remake
Every piece starts as a drawing.
From your photo. To their portrait.
- Step 01
Upload
A clear photo of your pet — face in focus, decent natural light. Most phone photos work.
- Step 02
Hand draw
A trained portrait artist hand-draws your pet from your photo — every whisker, every marking.
- Step 03
Engraved
Every line of the portrait laser-engraved into 316L surgical steel — held in the metal itself.
- Step 04
Gift ready
Packed in a velvet box with a hand-tied ribbon — ready to give or keep.
- Step 05
Ship
Sealed, labeled, and on its way — with 30-day returns if anything's not right.
- Read the full process journal
Product details
About
The bar lies flat across the collarbone, slim and horizontal, quieter than a pendant that swings. That shape is the point: it sits straight, it layers clean under or over other chains, and it reads at a glance. On its face the portrait and the name run side by side, left to right, so you take in both at once. An artist draws your pet's face by hand from the photo you send, then it's laser-engraved beside their name. Whether they're still padding around the house or remembered, the same bar keeps them close.
About
The bar lies flat across the collarbone, slim and horizontal, quieter than a pendant that swings. That shape is the point: it sits straight, it layers clean under or over other chains, and it reads at a glance. On its face the portrait and the name run side by side, left to right, so you take in both at once. An artist draws your pet's face by hand from the photo you send, then it's laser-engraved beside their name. Whether they're still padding around the house or remembered, the same bar keeps them close.
Specs
- Material
- 316L surgical stainless steel (hypoallergenic, tarnish-resistant)
- Pendant size
- 2.36 x 1.38 x 0.08 inch (60 x 35 x 2 mm)
- Chain
- Matching-finish cable chain with lobster clasp
- Chain lengths
- 16, 18, or 20 inch (fixed, no extender)
- Engraving
- Laser-engraved, permanent
- Design
- Pet portrait + name on one bar (any pet type or paw print)
Specs
- Material
- 316L surgical stainless steel (hypoallergenic, tarnish-resistant)
- Pendant size
- 2.36 x 1.38 x 0.08 inch (60 x 35 x 2 mm)
- Chain
- Matching-finish cable chain with lobster clasp
- Chain lengths
- 16, 18, or 20 inch (fixed, no extender)
- Engraving
- Laser-engraved, permanent
- Design
- Pet portrait + name on one bar (any pet type or paw print)
FAQ
What photo works best for the bar's horizontal layout?
The bar shape favors horizontal face compositions: face turned slightly side-on, or both eyes + ears visible across the width. Front-facing portraits also work, just narrower. Soft natural light, clear focus. We email back before drawing if your reference can't carry the detail.
Will the portrait and name read together cleanly?
Yes — the bar's horizontal layout gives portrait left, name right, each readable on its own glance. The artist scales the portrait to leave clear room for the name. Bad reference photo = callback from us before the artist starts.
Will the engraving stay sharp through daily wear?
Yes — the portrait and name are laser-cut into 316L surgical steel structurally, not surface print. The plating holds color through daily wear, showering, and incidental contact. Both engravings read clearly for years.
How is this different from your Pet Portrait Necklace?
Two ways to wear the portrait. The Face is a single round disc, stackable for multi-pet households. This is a horizontal bar with portrait + name side-by-side in one pendant. Disc for layering multiple pets; bar for portrait+name as one piece.
Do you make the bar shape as earrings?
Yes — our Pet Name Bar Earrings carry your pet's name on a slim bar at the ear, a matching way to wear the bar shape as a pair.
FAQ
What photo works best for the bar's horizontal layout?
The bar shape favors horizontal face compositions: face turned slightly side-on, or both eyes + ears visible across the width. Front-facing portraits also work, just narrower. Soft natural light, clear focus. We email back before drawing if your reference can't carry the detail.
Will the portrait and name read together cleanly?
Yes — the bar's horizontal layout gives portrait left, name right, each readable on its own glance. The artist scales the portrait to leave clear room for the name. Bad reference photo = callback from us before the artist starts.
Will the engraving stay sharp through daily wear?
Yes — the portrait and name are laser-cut into 316L surgical steel structurally, not surface print. The plating holds color through daily wear, showering, and incidental contact. Both engravings read clearly for years.
How is this different from your Pet Portrait Necklace?
Two ways to wear the portrait. The Face is a single round disc, stackable for multi-pet households. This is a horizontal bar with portrait + name side-by-side in one pendant. Disc for layering multiple pets; bar for portrait+name as one piece.
Do you make the bar shape as earrings?
Yes — our Pet Name Bar Earrings carry your pet's name on a slim bar at the ear, a matching way to wear the bar shape as a pair.
Some bonds are worth tracing. Always.
Founded by a pet parent · Built for the love no one tells you to grieve