Paw Print Name Bracelet — Custom Engraved Pet Charms
One engraved paw on your wrist for every pet you name — the ones curled up beside you now, and the ones you carry from before. Small enough to wear every day, each name engraved to stay clear and legible.
Each pet gets their own engraved paw · $7.00 per paw
Ships within 48 hours
- 316L Surgical SteelHypoallergenic
- Hand-drawnBy a real artist
- Gift-ready boxIncluded free
- 30-day guaranteeLove it or remake
Hand-drawn for them. Worn by them.
From your photo. To their portrait.
- Step 01
Upload
A clear photo of your pet — face in focus, decent natural light. Most phone photos work.
- Step 02
Hand draw
A trained portrait artist hand-draws your pet from your photo — every whisker, every marking.
- Step 03
Engraved
Every line of the portrait laser-engraved into 316L surgical steel — held in the metal itself.
- Step 04
Gift ready
Packed in a velvet box with a hand-tied ribbon — ready to give or keep.
- Step 05
Ship
Sealed, labeled, and on its way — with 30-day returns if anything's not right.
Product details
About
Each paw is a small engraved nameplate, and you choose how many: one for a single companion, or up to four linked along the chain when your house holds a crowd. Every name is laser-cut into the metal rather than printed on top, so it reads clearly and stays sharp instead of fading with daily wear.
It rides on a six-inch chain with a two-inch extender, so it sits where you can glance down and find them through an ordinary day. Add a paw now and another later if your family grows; the bracelet can hold the pets still underfoot alongside the one you keep close from before.
About
Each paw is a small engraved nameplate, and you choose how many: one for a single companion, or up to four linked along the chain when your house holds a crowd. Every name is laser-cut into the metal rather than printed on top, so it reads clearly and stays sharp instead of fading with daily wear.
It rides on a six-inch chain with a two-inch extender, so it sits where you can glance down and find them through an ordinary day. Add a paw now and another later if your family grows; the bracelet can hold the pets still underfoot alongside the one you keep close from before.
Specs
- Material
- 316L surgical stainless steel (hypoallergenic, tarnish-resistant)
- Paw size
- 15 mm × 13 mm per paw (about 0.59 × 0.51 inch)
- Bracelet
- 6 inch chain with a 2 inch extender and lobster clasp (fits about 6 to 8 inch wrists)
- Engraving
- Laser-engraved and permanent, up to 10 characters per paw
- Paw count
- 1, 2, 3, or 4 paws, one per pet, linked along the chain
Specs
- Material
- 316L surgical stainless steel (hypoallergenic, tarnish-resistant)
- Paw size
- 15 mm × 13 mm per paw (about 0.59 × 0.51 inch)
- Bracelet
- 6 inch chain with a 2 inch extender and lobster clasp (fits about 6 to 8 inch wrists)
- Engraving
- Laser-engraved and permanent, up to 10 characters per paw
- Paw count
- 1, 2, 3, or 4 paws, one per pet, linked along the chain
FAQ
How long can each name be, and will it stay readable?
Each paw fits up to 10 characters, which covers most pet names: Bella, Gus, Winston, Charlie. If a pet's name runs longer, a nickname works well, or we'll email you to confirm the spacing before we engrave it. Most owners find their pets' everyday names fit with room to spare.
How many paws can I add, and can I add a pet later?
Choose 1 to 4 paws, one for each pet, linked along the same chain. If your family grows later, contact us and we can make an extra paw to add to your bracelet, or build a second one. Many people start with the pets they have now and add a new paw when a new pet arrives.
Will the engraving and finish hold up to everyday wear?
Yes. The names are cut into the steel structurally, not printed, so they don't wear away with daily contact. The 316L stainless base is hypoallergenic and tarnish-resistant, and the gold or rhodium plating wears well with regular care. Made for everyday wear, not just special occasions.
How is this different from the paw print name necklace?
Both use the same paw-shaped charms engraved with your pets' names, in the same gold and silver finishes. This one wears on your wrist on an adjustable 6 inch chain; the paw print name necklace wears at the collarbone and stacks up to 5 paws. Choose the bracelet for everyday wrist wear, or the necklace if you want it closer or need more than four paws.
FAQ
How long can each name be, and will it stay readable?
Each paw fits up to 10 characters, which covers most pet names: Bella, Gus, Winston, Charlie. If a pet's name runs longer, a nickname works well, or we'll email you to confirm the spacing before we engrave it. Most owners find their pets' everyday names fit with room to spare.
How many paws can I add, and can I add a pet later?
Choose 1 to 4 paws, one for each pet, linked along the same chain. If your family grows later, contact us and we can make an extra paw to add to your bracelet, or build a second one. Many people start with the pets they have now and add a new paw when a new pet arrives.
Will the engraving and finish hold up to everyday wear?
Yes. The names are cut into the steel structurally, not printed, so they don't wear away with daily contact. The 316L stainless base is hypoallergenic and tarnish-resistant, and the gold or rhodium plating wears well with regular care. Made for everyday wear, not just special occasions.
How is this different from the paw print name necklace?
Both use the same paw-shaped charms engraved with your pets' names, in the same gold and silver finishes. This one wears on your wrist on an adjustable 6 inch chain; the paw print name necklace wears at the collarbone and stacks up to 5 paws. Choose the bracelet for everyday wrist wear, or the necklace if you want it closer or need more than four paws.
Some bonds are worth tracing. Always.
Founded by a pet parent · Built for the love no one tells you to grieve